Skip to content
orenatobr.com

SECTION 04

3DS

Homebrew for a 3DS or 2DS running Luma3DS.

hometidy-3ds

v0.2.0 · Nov 11, 2026

Sorts the HOME Menu and puts a green check on finished games. It backs up the layout files, verifies what it wrote and puts the original bytes back if anything fails.

Latest changes

  • HomeTidy sorts the HOME Menu and puts a green check on finished games, on the console. Tested on an EUR console.
  • Install: pick the CIA for your console's region (hometidy-EUR.cia for Europe and Australia), copy it to the SD card, install it with FBI and open HomeTidy. Needs Luma3DS. All regions share one title id, so installing the right build replaces a wrong one.
  • Changes since v0.1.0
  • Fixes a crash right after start (stack overflow in the sort).
  • Detects the console region; one CIA per region (JPN, USA, EUR, CHN, KOR, TWN). Only EUR has run against real files, the others are experimental.
  • English only.
  • The green check list shows games (titles inside HOME folders); X shows every title.
  • Any green check can be undone, including checks drawn by other tools.
  • The banner fits the HOME screen.
  • SHA-256 sums are in SHA256SUMS.txt.

Download

How to install

What you need

  • A 3DS with Luma3DS.
  • FBI installed on the console.
  • An SD card reader or another way to copy files to the SD card.
  1. Pick your region

    Download hometidy-<region>.cia from the latest release. Australian consoles use EUR.

  2. Copy it to the SD card

    Any folder works, as long as FBI can browse to it.

  3. Install with FBI

    Open FBI, find the file on the SD card and install it. All regions share one title id, so installing the right build replaces a wrong one.

  4. Open HomeTidy

    Start it from the HOME Menu. Press A to apply a new order, then use Reboot now: HOME keeps its own copy of the layout and would overwrite yours otherwise.

ftpd

v3.3.5 · Nov 7, 2026

A fork of mtheall/ftpd, the FTP server for 3DS and Switch. On the 3DS it also exposes the internal memory: /ctrnand, /twln and /twlp appear next to the SD card contents.

Latest changes

  • Fix: HOME extdata uploads no longer fail with 451
  • Uploading SaveData.dat to /homeext (HOME layout, ftpd-home opened with R held) answered 451 Failed to commit the file on every attempt, although the new bytes were written and survived a reboot. Extdata is written through to the card and has no journal, so a refused COMMIT_SAVE_DATA no longer fails the transfer.
  • 3.3.5 keeps Flush, GetSize and SetSize failures fatal and appends the result code of any failing finish step to sdmc:/ftpd-home-diag.txt, so the cause can be read from the card.
  • Files
  • ftpd.cia (000400000f7df100): standard server, SD plus NAND read access.
  • ftpd-home.cia (000400000f7df200): adds /homesys and /homeext when R is held at launch. This is the one with the fix.
  • ftpd.3dsx: homebrew launcher build.
  • Tip for writing the HOME layout
  • Reboot the console from the Luma power menu right after writing, without leaving ftpd-home for the HOME Menu. HOME rewrites the layout from memory when it resumes and overwrites the new order.
  • Not tested yet
  • Built and title ids checked only; this build has not run on hardware. On 3.3.4 the layout write persisted despite the 451. The .3dsx and NAND writes are still untested. Reading CacheD.dat past about 2.3 MB still stops with a 451.
  • Details: #9, #10.

Download

How to install

What you need

  • A 3DS with custom firmware.
  • FBI, for the CIA build.
  • An FTP client on a computer in the same network.

Heads up. Writing to NAND can brick the console, so back it up first. NAND access is not tested on real hardware yet.

  1. Pick a build

    ftpd.cia installs as an app. ftpd.3dsx runs from the Homebrew Launcher, but only sees the NAND areas if the launcher grants the rights. ftpd-home.cia is a separate build that can also reach the HOME menu layout (EUR only, opt-in).

  2. Install

    Copy the CIA to the SD card and install it with FBI, or put the 3dsx in /3ds/ on the SD card.

  3. Start the server

    Open ftpd on the console. It shows its IP address and port.

  4. Connect

    Point your FTP client at that address. The root folder is the SD card.