Tools for the PicoStation Multi House V3, an SD card based optical drive emulator for the original PlayStation.
PicoStation-MultiHouse-macOS
v0.5.5 · Nov 12, 2026
A native Apple Silicon port of the PicoStation Multi House V3 Manager. It builds the SD card layout (cases, discs, cover art, GameShark cheats, menu and music) straight onto the card. Unofficial; the design of Multi House belongs to ALBERONISSE.
Latest changes
Fix
The Manager's menu now waits about 1.5 s (was 0.8 s) after sending its own Game ID, so SD2PSX family memory cards (such as the BitFunx PSxMemCard) finish switching virtual card before the menu looks for its settings and favorites file. In the SD2PSX firmware source an id that is not in its game database selects the ordinary Card1 (channel 1), so favorites live on a stable card.
Notes
Opening the menu on those cards takes about 0.7 s longer. Original memory cards are unaffected.
Favorites saved earlier on a game's card must be saved again.
Validated in an emulator model of the device and in the test suite. Not verified on real BitFunx hardware.
The firmware UF2 is unchanged: favorites are handled by the PS1 menu embedded in the Manager.
Install
Apple Silicon Mac, macOS 12 or later. Paste this in Terminal. It downloads this release, checks the SHA-256 and installs it in /Applications without the quarantine flag. Running it again updates an existing install:
A Mac with Apple Silicon (M1 or newer) and macOS 12 or later. Intel Macs are not supported.
A PicoStation running the Multi House firmware, and its SD card.
1
Open Terminal
Use a normal APFS volume. macOS may refuse to launch an app extracted to an exFAT or NTFS drive.
2
Run the installer
It downloads the latest release, checks its SHA-256 and installs the app into /Applications without the quarantine flag. Running it again updates the app.
Launch PicoStation Multi House V3 from /Applications.
4
Build the card
Insert the SD card, pick your games and let the app write the Multi House layout to it.
PicoStation-MultiHouse-Firmware
v0.3.2 · Nov 13, 2026
An open source reconstruction of the PicoStation Multi House V3 firmware for the RP2040, built by CI from readable C++. Unofficial and not affiliated with the original authors.
Latest changes
> Status: untested on a working console. The runs that sent the PS1 to the Memory Card screen (v0.3.0, v0.3.1, v0.3.2) happened on a console whose CLK wire next to the CD clock oscillator was loose, so they say nothing about this firmware. Test order after the wire is repaired: run the board diagnostic (release diag-v1.0.0), flash v0.3.2, and only if it fails flash the original PicoStation_MH_V3.uf2 and then the long names patch of it (release longnames-patch-v1.0.0). Keep the original UF2 ready: flash it back through BOOTSEL (hold BOOTSEL while plugging the USB cable, copy the file to the RPI-RP2 drive) to roll back.
What changed from v0.3.1
The original V3 reads the flash unique ID first thing in main; the rebuild did not. With the read added, the first 138 peripheral writes of both images are identical in the emulator, from reset to core 0's idle loop. The only remaining difference is the order of the I2C0 setup (same register values).
Everything else is as in v0.3.1 (flash divider 4 like the original, patched menu sectors, long names and parentheses, Disc row flag 0 like the original).
Rollback
Flash the original PicoStation_MH_V3.uf2 through BOOTSEL (hold BOOTSEL while plugging the USB cable, copy the file to the RPI-RP2 drive).
Not tested on a console, the BitFunx or a real SD card. If it also goes to the Memory Card screen, the cause is in what runs after core 0's idle loop (second core I2S loop, interrupt handlers, PS1 command handling), which the emulator cannot run.
Why this is Latest
The end criterion of this project is a UF2 compiled from the repository's code, published as Latest. This is that UF2 (built by CI from the tagged commit). It contains long names up to 71 characters with parentheses, the favorites fix for SD2PSX family Memory Cards (BitFunx PSxMemCard and similar) and the flash and boot fixes found by comparing it with the original V3 image. It has not been confirmed on a working console: the earlier Me
A PicoStation board with a Raspberry Pi Pico (RP2040).
A USB cable and a computer that can open a USB drive.
Heads up. Nothing in this firmware was run on a console or a real SD card, and the machine code is not byte identical to the original. Read docs/RE_STATUS.md in the repository before flashing. A Pico in BOOTSEL mode cannot be read back, so keep a copy of the firmware you are replacing.
1
Download the firmware
Get the .uf2 file named picostation-multihouse-v<version>-pico1.uf2 from the latest release. SHA256SUMS lets you check it.
2
Enter BOOTSEL mode
Hold the BOOTSEL button on the Pico while you plug it into USB. A drive named RPI-RP2 appears.
3
Flash
Copy the .uf2 file to the RPI-RP2 drive. The Pico reboots by itself when the copy ends.
4
Test
Put the board back in the console with the SD card and boot a game.